HN Series

Hot / Cold / Steam Electric Powered Natural Gas Fired Pressure Washer

Common Features

Stainless Steel Housing:
Coil enclosure and motor cover are constructed of stainless steel for lifetime corrosion resistance; powder coated welded chassis provides durability.

Unmatched Access and Serviceability: Pivoting cover opens to provide exceptional pump and component access. Standard skid legs provide access from below.

Clean and Efficient Heating System: 24v automatic electronic ignition on low emission natural gas burner with no pilot to light. High efficiency schedule 80 coil with ceramic insulation delivers years of uninterrupted service.

Total Relief Unloader:
Flow sensitive unloader allows pressure to build up gradually as trigger gun is activated reducing gun recoil. When gun is released the entire system and discharge piping is relieved of trapped pressure.

NEMA4 Water Tight Electrical Box:
ETL certified to UL1776 Class 2 for use in wash-down area, exceeds industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. Standard diagnostic indicators, including an hour meter and pressure gauge to monitor system use, ensure optimal system performance.

HN Ultimate Series Features

Remote Control with Hose, Nozzle, Wand Rack:
Safe, 24 volt remote with full pressure soap output and 100’ cord gives the operator control of all functions both at the machine and
the remote wash site. Additional wash station remotes can be added.

Automatic Shutdown:
Adjustable automatic shutdown prolongs pump life and provides worry-free operation.

CAT Belt Driven pump:
Low RPM drive – cooler, quieter, continuous duty performance. These industrial triplex pumps feature concentrically bored and polished, graphite impregnated ceramic plungers with advanced seal design.

Ready to Work when you are:
No need to fill fuel tanks or hunt down a water supply when machine is directly plumbed into natural gas and water lines. The pressure washer can be housed indoors, away from the elements, while locating the wash station remote outdoors.

More Standard Features:

HN Proline™ Series Features

Bypass Cool System:
Pump cooling system prevents pump from overheating in bypass for worry free operation. (Remote wash station and pressure gage not included on HN Proline™)

Other Proline Features:

• Durable Powder Coated frame base
• Manual On / Off

Optional Features and Accessories:

Specifications

Specifications may vary, consult factory for custom models

Additional information for SQAMD Permits:

http://www.aqmd.gov/permit/forms.html

http://www.aqmd.gov/rules/reg/reg02/r219.pdf

These links detail the exemptions for both certification &  that our equipment falls within.

HD Series Pressure Steamer

Portable Hot Pressure Washers and Steam Cleaners

HD Series

Features

High Intensity Diesel Burners & Super Efficient Heating Coils :
The ultimate balance of power and efficiency in these uniquely designed schedule 80 coils. Provides economical operation with consistent superior performance. Auto ignition adds peace of mind & ease of operation.

Stainless Steel Coil Housing & SS Inner Wrap :
Lifetime corrosion resistance, inside and out – unmatched coil protection, double wall protected to contain the intense heat of the burner providing optimal long life and performance.

Stainless Steel Frames and Panels :
Not just decorative flashes, these rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Quick connects provide easy removal for full access to all major components. HD Direct Drive units have open back side for easy service access.

8 Gallon Fuel Tank with Filtration :
Heavy Duty “roto-molded” rust free fuel tanks with fuel filter to protect against contaminated fuel. Extended run time reduces interruptions.

Other Standard Features
Adjustable pressure unloader, safety relief valve, burst disc technology and temperature limit switch. Nozzles for various applications, 50’ hose, gun and wand included. Heavy duty industrial motor with standard thermal overload protection. NEMA4-Water tight control panel with lighted switches. 4) 10” pneumatic tires for enhanced mobility and 4 handles for easy moving.

HD Direct Drive Models

Automatic Start-up and Shut-down : (HD15002E1C and HD22004E2C)
Operator has total control over the system from the trigger gun. This added convenience not only saves time and effort, it reduces wear of the pump, prevents the pump from running dry and produces an energy efficient system.

Downstream Chemical Injection :
The direct drive models are equipped with downstream chemical injection that can be turned on and off right from the gun – no need for the operator to return to the machine. Chemicals and other additives are introduced after the pump eliminating the risk of pump damage.

HD Belt Drive Models

Inlet Chemical Injection :
The belt drive models are equipped with inlet soap injection combined with precision chemical metering valve and float tank to inject soap at full pressure for optimal cleaning effectiveness. Panel mounted controls enable the operator to vary the mixture of soap or other additives with ease.

Belt Driven Pump :
High torque, low RPM drive- cooler, quieter, continuous duty performance. These ceramic plunger triplex pumps feature oversized aluminum crankcases with special cooling fins for extended pump life and stainless steel valves, seats, springs and plunger rods for positive seating and increased performance.

Adjustable Temperature :
Panel mounted adjustable temperature knob with steam setting increases cleaning effectiveness.

Specifications

Specifications may vary, consult factory for custom models

Optional Accessories for the HD Series Wet sandblast assembly Hose and wand extensions Stainless steel hose reels Technical Information Color Brochure Tek Sheets HD15002E1M Tek Sheet HD15002E1C Tek Sheet HD22004E2H Tek Sheet HD27004E2H Tek Sheet HD10003E1G Tek Sheet HD20004E2G Tek Sheet HD25004E2G Tek Sheet HD25004E2C Tek Sheet HD30003E2G Tek Sheet HD Exploded View

HP Series Pressure Washer

Hot / Cold / Steam Portable Electric Powered Pressure Washer

The HP Series line up has been expanded to include 3 Phase units!!
Click here for the Product Release flyer.

Look at the Tek Sheets below for details

High Heat / High Flow System:
The ultimate balance of heat and flow increases your cleaning power providing a consistent superior performance. Uniquely designed with Hydro Tek schedule 80 coils and Auto ignition for peace of mind & ease of operation. High capacity diesel burner with higher temperature rise for faster cleaning.

Stainless Steel Coil Housing and Inner Wrap:
Lifetime corrosion resistance, inside and out - unmatched coil protection, double wall protected to contain the intense heat from the burner providing optimal long life and performance.

Auto Start and Time Delay Shutdown:
Operator has total control over the system from the trigger gun. This added convenience not only saves time and effort, it reduces wear of the pump and produces an energy efficient system that outperforms the traditional manual on/off.

All Stainless Steel Frames and Panels:
Not just decorative flashes, these rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come. Quick connects provide easy removal for full access to all major components and the ultimate in serviceability.

Adjustable Temperature with Steam Setting:
Front mounted controls allows quick and easy adjustments of temperature and steam settings with higher heat than comparable washers for your toughest cleaning applications.

NEMA4 – Water Tight Control Panel:
ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics.

CAT Direct Drive Pump:
These Industrial triplex pumps feature extra service factor to outperform the competition in longevity. Featuring concentrically bored & polished, graphite impregnated ceramic plungers with advanced seal design to meet our ultimate standard, yours.

8 gallon Diesel Tank with filtration:
Heavy Duty “roto-molded” rust free fuel tank with water separating fuel filter to protect against contaminated fuel. Extended run time (up to 5 hrs) eliminates interruptions.

3.5 Gallon Soap Tank:
Chemical tank holds up to 3.5 gallons of soap for added convenience. (Only on HP21004 and HP28004)

More Standard Features

Specifications

Specifications may vary, consult factory for custom models

SC Series Mobile Wash Skid

Self Contained Hot / Cold / Steam High Pressure Washers

SC Series

Rugged “Pro-tect-it” Frame:

The ultimate in protection. Hydro Tek’s unique “Pro-tect-it” frame of 1 ¼”, heavy gauge steel, with durable electrostatically applied powder coat finish. The built-in lifting eyes gives you greater flexibility and protection when moving the system.

NEMA4- Water Tight Control Panel:

ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. Standard diagnostic indicators, including an hour meter and pressure gauge to monitor system use, ensures optimal system performance.

110V Burners with on-board 2900 watt generator:

Provides automatic, high intensity ignition and reliable power for the heating system. Supplemental power outlets from the generator (GFCI Protected) offers the operator additional electrical power to run lights or accessories.

Stainless Steel Panels :

Not just decorative flashes, these rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come. Quick connects provide easy removal for full access to all major components and the ultimate in serviceability.

Heating System:

The ultimate balance of power, efficiency and corrosion resistance in this uniquely designed Hydro Tek schedule 80 coil. Rugged construction suitable for ‘over the road use’ works in harmony with the double wall stainless steel, ceramic insulated housing. Virtually indestructible construction and industry leading performance-years of uninterrupted, worry free service.

Total Relief Unloader:

Flow sensitive unloader allows pressure to build up gradually as trigger gun is activated eliminating “pressure spikes” and improving operator control and safety. When the gun is released, entire system pressure is relieved, enhancing the life of the system and eliminating engine starting problems associated with trapped pressure.

8 Gallon Gas Tank/ 18 Gallon Diesel Tank:

Heavy Duty “roto-molded” rust free fuel tanks with water separating fuel filter to protect against contaminated fuel. Extended run time (up to 8 hrs.) eliminates interruptions.

More Standard Features:

• Quick release nozzles
• Industrial gasoline engines with efficient OHV design, feature heavy duty steel cylinder liners for industrial strength power
• Durable diesel engines available for enhanced longevity and efficient operation.
• Burst disc technology for operator safety
• Rustproof float tank to regulate incoming water ensuring consistent system performance.
• Adjustable temperature up to 250° F with steam setting
• Heavy duty 50' hose 250° F rated
• “Q” models are extra quiet, 80 db at 25’

Specifications

For complete specs see the Tek Sheets below

Specifications may vary due to ambient conditions.

Optional Accessories:

• Stainless Steel Frame - long life and corrosion resistance for harsh environements
• Turbo Nozzle
• Hydro Twister ®- deck and concrete cleaner
• Wet sandblast assembly
• Hose and wand extensions
• Stainless steel hose reel with lifetime stainless steel corrosion resistance
• Wheel Kit with various wheel combinations
• Machine covers
• Trailers & Tank Skid Systems
• Hydro Vacuum® System : Wash - Contain - Recycle.
• The SC series generator can power the Hydro Vacuum ® to capture, filter and recycle used wash water, saving time, money and the environment.

SCU Series Mobile Wash Skid

Self Contained Hot / Cold / Steam High Pressure Washers

SCU Series Pressure Washer

Experience ultimate duty cleaning power. The SCU Series has the reserve horsepower and heat rise to get the job done faster, with less soap and reduced noise pollution. It has a rust proof, stainless steel frame and long lasting, quality components to withstand the daily use that a professional demands. The built-in generator has additional capacity to run lights or water recycle accessories and you can also carry water with the optional ProTowWash ® trailer for total self-containment.

Features:

Rust Proof - Stainless Steel Frame, Panels, and Coil Wrap :
The Ultimate in protection, with a stainless steel lifetime guarantee. The rugged and durable frame and panels offer protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come. Lifting eyes and 4-way forklift access are integrated into frame along with an open design for service access.

NEMA4- Water Tight Control Panel :
ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. Standard diagnostic indicators, including an hour meter and pressure gauge to monitor system use, ensures optimal system performance.

110V Burners with on-board 2900 watt generator :
Provides automatic, high intensity ignition and reliable power for the heating system. Supplemental power outlets from the generator (GFCI Protected) offers the operator additional electrical power to run lights or accessories.

Burner Output:
Super duty burner delivers 441,000 to 614,000 BTU’s with the highest heating capacity in its class.

Heating System:
The Ultimate balance of power, efficiency and corrosion resistance in this uniquely designed Hydro Tek schedule 80 coil. Rugged construction suitable for ‘over the road use’ works in harmony with the double wall stainless steel, ceramic insulated housing. Virtually indestructible construction and industry leading performance-years of uninterrupted, worry free service.

Industrial Engines:
Efficient OHV gas engines with electric key start, low oil shutdown, and heavy duty steel cylinder liners for industrial strength power.

Total Relief Unloader:
Flow sensitive unloader allows pressure to build up gradually as trigger gun is activated eliminating “pressure spikes” and improving operator control and safety. When the gun is released, entire system pressure is relieved, enhancing the life of the system and eliminating engine starting problems associated with trapped pressure. Balanced regulating unloader on 2-Gun systems.

Belt Driven Pump:
These industrial pumps feature high torque, low RPM drive- cooler, quieter, continuous duty performance.

8 Gallon Gas Tank / 18 Gallon Diesel Tank:
Extra large, heavy duty “roto-molded” rust free fuel tanks with water separating fuel filter to protect against contaminated fuel. Large fuel tanks extend run time, eliminating interruptions to refuel.

More Standard Features:

• Quick release nozzles
• Burst disc technology for operator safety
• Panel mounted adjustable thermostat
• Heavy duty hose 50’ 5800 PSI, 2500 rated
• “Q” models are extra quiet, 80 db at 25’
• 4 gallon float tank with double inlet filtration, includes 3 Way ball
  valve for connection to a bulk water supply tank. (9gpm high flow machines require a bulk tank for water supply, therefore do not have a float tank assembly)

Specifications:

* can be run as a two gun system

SS40004VG

4000

4.0

250 F

18

Vanguard Gas / Direct

SS30005VH

3000

5.0

250 F

18

Vanguard Gas / Belt

Technical information

SS Series Full Color Brochure

Tek Sheets

• SS30003VG Tek Sheet
• SS35003VG Tek Sheet
• SS38004VG Tek Sheet
• SS40004VG Tek Sheet
• SS30005VS Tek Sheet
• SS30005VH Tek Sheet
• SS35004VH Tek Sheet
• SS35005V Tek Sheet
• SS35005VG Tek Sheet
• SS35006VG Tek Sheet
• SS40004VH Tek Sheet
• SS30004DH Tek Sheet

SS Exploded View